buckling load
英 [ˈbʌklɪŋ ləʊd]
美 [ˈbʌklɪŋ loʊd]
临界（纵向）载荷；弯曲临界（折断）载荷
双语例句
- The prosperous post buckling load capacity of web plates of box girders can be used.
竖向预应力损失过大和分布不均是引起箱梁桥腹板开裂的重要原因。 - The concrete slabs strengthen the torsion buckling capacity of the steel grids and enhance the minimum geometric nonlinear buckling load.
混凝土面板加强了网架的抗扭转屈曲能力，提高了最小几何非线性屈曲荷载。 - ULTIMATE BEARING CAPACITY AND BUCKLING MODES ANALYSIS OF TRAPEZIUM CHANNEL SECTION ARCH CORRUGATED STEEL ROOF Determination of Nonlinear Buckling Load of Structure with Initial Imperfection
梯型波纹拱结构的屈曲模态及其极限承载能力考虑初始缺陷的结构非线性屈曲承载力分析 - Finally, the random structural buckling load's concrete expressive formula of the derrick are given out.
最后，给出了该井架随机屈曲荷载的具体表达式。 - A Study on the Strength and Buckling Load of Steel Bracket Plates
钢承托板的强度和屈曲承载力的研究 - First, the eigenvalues of elastic steel arches with non-holes in web are computed, and the buckling load as well as buckling mode related to planar first unstable failure mode is determined for different restrictions and different loads.
首先进行了弹性无孔洞钢拱的特征值计算，分析出了不同约束、不同荷载作用下的平面内第一个失稳模态的屈曲荷载和与其相应的屈曲模态。 - Compile FORTRAN procedure of buckling of composite stiffened plane to solve critical buckling load of laminate;
用FORTRAN语言编制了复合材料加筋层合板的稳定性程序，求解层合板屈曲临界载荷； - And the formula of the buckling load was derived with the minimum potential energy principle.
然后利用最小势能原理推导了锥形桩屈曲临界荷载的计算公式。 - The research of this paper is based on the revised method of bifurcation buckling load, and it can be application or expansion of Shanley model in the analysis of imperfect structure. The work of this paper can give a reference for further reliability analysis of imperfect structure.
该研究的基础是改进了的基于分叉的屈曲荷载方法，是Shanley理论模型在不完整结构分析中的应用和推广，为进一步开展不完整结构的可靠性分析提供了参考。 - Under axisymmetrical compressive conditions, the critical buckling load of sea ice plate is given.
在轴对称条件下，给出海冰板的环向屈曲临界载荷。 - The result of calculation proves that the soil around the pile body can improve the buckling load a lot.
计算结果证明，桩周土体的作用使桩基的临界屈曲荷载有了较大提高。 - The critical buckling load and mode areobtained when the end of beams is impacted by step and impulsive axial loads.
在轴向阶梯载荷和脉冲载荷冲击下得到了梁的临界屈曲载荷及初始屈曲模态。 - The linear and geometric nonlinear buckling load including transverse shear deformation are calculated by Timoshenko first-order shear deformation theory and Reddy higher-order shear deformation theory respectively.
本文利用一阶剪切理论和Reddy高阶剪切理论计算了考虑横向剪切变形影响的复合材料层合圆柱壳的线性失稳载荷和几何非线性失稳载荷。 - Finally, buckling load and mode can be calculated from the characteristic equation.
最后由屈曲方程计算含内埋矩形脱层壳的屈曲载荷和屈曲模态。 - The computation of elasto plastic buckling load displacement response curves for plate and shell structures
板壳结构弹塑性屈曲问题载荷&位移响应曲线的计算 - This paper presents a method for calculating the buckling load and mode shape of aring-stiffened circular cylindrical shell subject to hydrostatic pressure.
本文给出了以环肋加强的圆柱壳在液压作用下屈曲形态和临界载荷的计算方法。 - For further improving buckling load, this paper adopts Genetic Algorithm to solve stacking sequence optimization.
在以上两方面优化工作基础上，本文采用遗传算法对加筋壁板的铺层顺序进行了优化分析，进一步提高了加筋壁板的屈曲临界载荷。 - A New Method for Calculating the Effect of the Shear Deformation on the Buckling Load
剪切对轴压临界载荷的影响的新方法 - Analysis shows that the effect of construction of concrete slabs on the minimum geometric nonlinear buckling load coefficient λ is not significant.
分析表明，混凝土面板施工对最小几何非线性屈曲荷载系数λ影响不明显。 - The effect of stiffening ring on the buckling load of shallow spherical shell
加强环对浅球壳屈曲载荷的影响 - This study was designed to research the hot bucking of circular plate with nonlinear axisymmetric and concentric ring support, and to discuss and analyse the effects of temperature and ring support position on the hot buckling load.
研究了轴对称同心环支承圆板的热屈曲，讨论分析了温度、环支承位置对热屈曲载荷的影响。 - The optimization constraints can be stress, stiffness, displacement, frequency or buckling load and dynamic response.
优化的约束条件包括应力、刚度、位移、频率、临界压力及动响应。 - The effects of the connectors on the critical buckling load and the bending stress of pipes in horizontal section are analyzed.
分析了钻杆接头对水平井段钻柱屈曲临界力和弯曲应力的影响，提出了计算钻柱正弦屈曲临界力的新方法。 - The effect of initial imperfection and elastic-plastic behavior on the buckling load is considered in the FEM analysis, and the curve of load-deflection in the post buckling stage is obtained.
分析中考虑了初挠度和弹塑性对耐压壳体失稳压力的影响，得到了后屈曲阶段的载荷&挠度曲线。 - Secondly, the critical buckling load of stacker is obtained by buckling analysis.
其次，对堆垛机进行屈曲分析，得出堆垛机失稳的临界载荷。 - The influence of rod joint diameter on equivalent bending stress and vertical deformation, and critical buckling load are obtained. The relative research results can provide the reference for selecting drill rod joint in engineering.
得出了钻杆接头外径对钻杆中等效弯曲应力和竖向变形以及钻杆临界屈曲荷载的影响规律，以便在实际工程中为合理选取钻杆接头提供借鉴。 - Height of columns, concrete grade and area of section are some factors considered when analyzing buckling load. ( 4) According to the completed results of this paper, the suggestion for the design theories and seismic design of the structures with specially shaped columns are given.
分析了柱高、混凝土强度等级、柱截面面积对屈曲荷载的影响。（4）根据文章所完成的研究成果，给出了异形柱结构体系设计理论与抗震设计的具体建议。 - Besides the coped size and other relative parameters have a large influence on buckling load of steel beam.
关于切口钢梁的局部屈曲研究目前还相对较少，切口尺寸以及其他相关参数在很大程度影响钢梁的屈曲荷载。 - Analysing the change laws of structural internal force and displacement, fundamental frequency and buckling load of cylindrical vierendeel latticed shell by changing rise-span ratio, shell thickness, web member section and mesh size.
分析了当矢跨比、网壳厚度、腹杆截面、网格尺寸等参数变化时，该结构内力和位移、基频以及屈曲荷载的变化规律，得出若干对工程设计有参考价值的结论。 - Comparing buckling load of corrugated fiberboard with different shape, its mechanical property is researched.
通过比较具有不同楞高和楞宽的瓦楞纸板的屈曲载荷，研究它的形状与力学性能之间的关系。